Ethyl 2,4-dihydroxybenzoateCAS# 4143-00-4 |
2D Structure
Quality Control & MSDS
3D structure
Package In Stock
Number of papers citing our products
Cas No. | 4143-00-4 | SDF | Download SDF |
PubChem ID | 821388 | Appearance | Powder |
Formula | C9H10O4 | M.Wt | 182.17 |
Type of Compound | Phenols | Storage | Desiccate at -20°C |
Solubility | Soluble in Chloroform,Dichloromethane,Ethyl Acetate,DMSO,Acetone,etc. | ||
Chemical Name | ethyl 2,4-dihydroxybenzoate | ||
SMILES | CCOC(=O)C1=C(C=C(C=C1)O)O | ||
Standard InChIKey | BRDIPNLKURUXCU-UHFFFAOYSA-N | ||
Standard InChI | InChI=1S/C9H10O4/c1-2-13-9(12)7-4-3-6(10)5-8(7)11/h3-5,10-11H,2H2,1H3 | ||
General tips | For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.Stock solution can be stored below -20℃ for several months. We recommend that you prepare and use the solution on the same day. However, if the test schedule requires, the stock solutions can be prepared in advance, and the stock solution must be sealed and stored below -20℃. In general, the stock solution can be kept for several months. Before use, we recommend that you leave the vial at room temperature for at least an hour before opening it. |
||
About Packaging | 1. The packaging of the product may be reversed during transportation, cause the high purity compounds to adhere to the neck or cap of the vial.Take the vail out of its packaging and shake gently until the compounds fall to the bottom of the vial. 2. For liquid products, please centrifuge at 500xg to gather the liquid to the bottom of the vial. 3. Try to avoid loss or contamination during the experiment. |
||
Shipping Condition | Packaging according to customer requirements(5mg, 10mg, 20mg and more). Ship via FedEx, DHL, UPS, EMS or other couriers with RT, or blue ice upon request. |
Ethyl 2,4-dihydroxybenzoate Dilution Calculator
Ethyl 2,4-dihydroxybenzoate Molarity Calculator
1 mg | 5 mg | 10 mg | 20 mg | 25 mg | |
1 mM | 5.4894 mL | 27.4469 mL | 54.8938 mL | 109.7876 mL | 137.2345 mL |
5 mM | 1.0979 mL | 5.4894 mL | 10.9788 mL | 21.9575 mL | 27.4469 mL |
10 mM | 0.5489 mL | 2.7447 mL | 5.4894 mL | 10.9788 mL | 13.7234 mL |
50 mM | 0.1098 mL | 0.5489 mL | 1.0979 mL | 2.1958 mL | 2.7447 mL |
100 mM | 0.0549 mL | 0.2745 mL | 0.5489 mL | 1.0979 mL | 1.3723 mL |
* Note: If you are in the process of experiment, it's necessary to make the dilution ratios of the samples. The dilution data above is only for reference. Normally, it's can get a better solubility within lower of Concentrations. |
Calcutta University
University of Minnesota
University of Maryland School of Medicine
University of Illinois at Chicago
The Ohio State University
University of Zurich
Harvard University
Colorado State University
Auburn University
Yale University
Worcester Polytechnic Institute
Washington State University
Stanford University
University of Leipzig
Universidade da Beira Interior
The Institute of Cancer Research
Heidelberg University
University of Amsterdam
University of Auckland
TsingHua University
The University of Michigan
Miami University
DRURY University
Jilin University
Fudan University
Wuhan University
Sun Yat-sen University
Universite de Paris
Deemed University
Auckland University
The University of Tokyo
Korea University
- 2,4-Dihydroxybezaldehyde
Catalog No.:BCX0489
CAS No.:95-01-2
- Rugulolide B
Catalog No.:BCX0488
CAS No.:3002032-71-2
- Rugulolide A
Catalog No.:BCX0487
CAS No.:3002032-70-1
- Oxyphyllone D
Catalog No.:BCX0486
CAS No.:1190094-25-7
- 4-(3-Hydroxydecyl)phenol
Catalog No.:BCX0485
CAS No.:1465124-36-0
- 5-Methoxydadahol A
Catalog No.:BCX0484
CAS No.:2410566-84-4
- Deoxylimonin
Catalog No.:BCX0483
CAS No.:989-23-1
- Dencichine
Catalog No.:BCX0482
CAS No.:5302-45-4
- Schisandrathera D
Catalog No.:BCX0481
CAS No.:2694046-04-1
- Schisanhenol B
Catalog No.:BCX0480
CAS No.:102681-52-7
- Indole-3-acetic acid β-D-glucopyranosyl ester
Catalog No.:BCX0479
CAS No.:19817-95-9
- Gypenoside LXXV
Catalog No.:BCX0478
CAS No.:110261-98-8
- 7-epi-α-Cyperone
Catalog No.:BCX0491
CAS No.:547-26-2
- 4-Hydroxy-4-methylcyclohex-2-en-1-one
Catalog No.:BCX0492
CAS No.:70150-56-0
- Sanggenon E
Catalog No.:BCX0493
CAS No.:81381-69-3
- Rugulolide D
Catalog No.:BCX0494
CAS No.:3002032-69-8
- Sanggenol C
Catalog No.:BCX0495
CAS No.:174423-32-6
- 7,4'-Di-O-methylaromadendrin
Catalog No.:BCX0496
CAS No.:41515-76-8
- Curdionolide B
Catalog No.:BCX0497
CAS No.:1190225-68-3
- Crenatoside
Catalog No.:BCX0498
CAS No.:61276-16-2
- Erythrinin E
Catalog No.:BCX0499
CAS No.:2731101-51-0
- Isocrenatoside
Catalog No.:BCX0500
CAS No.:221895-09-6
- Teuhetenone A
Catalog No.:BCX0501
CAS No.:152481-80-6
- Oxyphyllenodiol A
Catalog No.:BCX0502
CAS No.:363610-30-4
Sensor Based on Molecularly Imprinted Polymer Membranes and Smartphone for Detection of Fusarium Contamination in Cereals.[Pubmed:32752255]
Sensors (Basel). 2020 Aug 1;20(15):4304.
The combination of the generic mobile technology and inherent stability, versatility and cost-effectiveness of the synthetic receptors allows producing optical sensors for potentially any analyte of interest, and, therefore, to qualify as a platform technology for a fast routine analysis of a large number of contaminated samples. To support this statement, we present here a novel miniature sensor based on a combination of molecularly imprinted polymer (MIP) membranes and a smartphone, which could be used for the point-of-care detection of an important food contaminant, oestrogen-like toxin zearalenone associated with Fusarium contamination of cereals. The detection is based on registration of natural fluorescence of zearalenone using a digital smartphone camera after it binds to the sensor recognition element. The recorded image is further processed using a mobile application. It shows here a first example of the zearalenone-specific MIP membranes synthesised in situ using "dummy template"-based approach with cyclododecyl 2, 4-dihydroxybenzoate as the template and 1-allylpiperazine as a functional monomer. The novel smartphone sensor system based on optimized MIP membranes provides zearalenone detection in cereal samples within the range of 1-10 microg mL(-1) demonstrating a detection limit of 1 microg mL(-1) in a direct sensing mode. In order to reach the level of sensitivity required for practical application, a competitive sensing mode is also developed. It is based on application of a highly-fluorescent structural analogue of zearalenone (2-[(pyrene-l-carbonyl) amino]Ethyl 2,4-dihydroxybenzoate) which is capable to compete with the target mycotoxin for the binding to zearalenone-selective sites in the membrane's structure. The competitive mode increases 100 times the sensor's sensitivity and allows detecting zearalenone at 10 ng mL(-1). The linear dynamic range in this case comprised 10-100 ng mL(-1). The sensor system is tested and found effective for zearalenone detection in maize, wheat and rye flour samples both spiked and naturally contaminated. The developed MIP membrane-based smartphone sensor system is an example of a novel, inexpensive tool for food quality analysis, which is portable and can be used for the "field" measurements and easily translated into the practice.
Microwave synthesis of iodine-doped bismuth oxychloride microspheres for the visible light photocatalytic removal of toxic hydroxyl-contained intermediates of parabens: catalyst synthesis, characterization, and mechanism insight.[Pubmed:31385253]
Environ Sci Pollut Res Int. 2019 Oct;26(28):28871-28883.
The iodine-doped bismuth oxychloride (I-doped BiOCl) microspheres are synthesized as the visible light photocatalysts for the photocatalytic removal of three toxic hydroxyl-contained intermediates of parabens. With the aid of the unique heating mode of microwave method, the I-doped BiOCl photocatalysts with tunable iodine contents and dispersed energy bands, instead of a mixture of BiOI and BiOCl or solid solution, are synthesized under the controllable conditions. Due to the stretched architectures, high specific surface area, and effective separation of photogenerated carriers, they exhibit high activity to the photocatalytic degradation of mEthyl 2,4-dihydroxybenzoate (MDB), methyl 3,4-dihydroxybenzoate (MDHB), and Ethyl 2,4-dihydroxybenzoate (EDB). As a typical result, it is indicated that though MDB as the most difficult intermediate of parabens to be degraded, a 91.2% removal ratio can still be achieved over the I-doped BiOCl with an energy band of 2.79 eV within 60 min. In addition, it is also confirmed that these photocatalysts remain stable throughout the photocatalytic reaction and can be reused, and more importantly, the photogenerated h(+) and *O(2)(-) are the key reactive species, while *OH plays a negligible role in the photocatalytic reaction. Resorcinol was identified as the main photodegraded intermediate. These results demonstrate that this photocatalytic system not only exhibit a high efficiency but also avoid the consequent secondary pollutions due to the no formation of complex hydroxyl derivatives.
Artelastocarpin and carpelastofuran, two new flavones, and cytotoxicities of prenyl flavonoids from Artocarpus elasticus against three cancer cell lines.[Pubmed:11745028]
Planta Med. 2001 Dec;67(9):867-70.
Further study of one of the fractions from the wood of Artocarpus elasticus furnished two new prenylated flavonoids artelastocarpin and carpelastofuran as well as Ethyl 2,4-dihydroxybenzoate. The two flavonoids and the prenylated flavonoids artelastin, artelastochromene, artelasticin, artocarpesin, and cyclocommunin isolated earlier from this species were tested for cytotoxicity in vitro against three human cell lines. All seven flavonoids were active, the cytotoxic effect varying from strong to moderate and with artelastin showing the most potent activity.