2,2-Bis(4-chlorophenyl)-1,1-dichloroethaneCAS# 72-54-8 |
Quality Control & MSDS
Number of papers citing our products
Chemical structure
3D structure
Cas No. | 72-54-8 | SDF | Download SDF |
PubChem ID | 6294 | Appearance | Powder |
Formula | C14H10Cl4 | M.Wt | 320 |
Type of Compound | N/A | Storage | Desiccate at -20°C |
Solubility | Soluble in Chloroform,Dichloromethane,Ethyl Acetate,DMSO,Acetone,etc. | ||
Chemical Name | 1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethyl]benzene | ||
SMILES | C1=CC(=CC=C1C(C2=CC=C(C=C2)Cl)C(Cl)Cl)Cl | ||
Standard InChIKey | AHJKRLASYNVKDZ-UHFFFAOYSA-N | ||
Standard InChI | InChI=1S/C14H10Cl4/c15-11-5-1-9(2-6-11)13(14(17)18)10-3-7-12(16)8-4-10/h1-8,13-14H | ||
General tips | For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.Stock solution can be stored below -20℃ for several months. We recommend that you prepare and use the solution on the same day. However, if the test schedule requires, the stock solutions can be prepared in advance, and the stock solution must be sealed and stored below -20℃. In general, the stock solution can be kept for several months. Before use, we recommend that you leave the vial at room temperature for at least an hour before opening it. |
||
About Packaging | 1. The packaging of the product may be reversed during transportation, cause the high purity compounds to adhere to the neck or cap of the vial.Take the vail out of its packaging and shake gently until the compounds fall to the bottom of the vial. 2. For liquid products, please centrifuge at 500xg to gather the liquid to the bottom of the vial. 3. Try to avoid loss or contamination during the experiment. |
||
Shipping Condition | Packaging according to customer requirements(5mg, 10mg, 20mg and more). Ship via FedEx, DHL, UPS, EMS or other couriers with RT, or blue ice upon request. |
2,2-Bis(4-chlorophenyl)-1,1-dichloroethane Dilution Calculator
2,2-Bis(4-chlorophenyl)-1,1-dichloroethane Molarity Calculator
1 mg | 5 mg | 10 mg | 20 mg | 25 mg | |
1 mM | 3.125 mL | 15.625 mL | 31.25 mL | 62.5 mL | 78.125 mL |
5 mM | 0.625 mL | 3.125 mL | 6.25 mL | 12.5 mL | 15.625 mL |
10 mM | 0.3125 mL | 1.5625 mL | 3.125 mL | 6.25 mL | 7.8125 mL |
50 mM | 0.0625 mL | 0.3125 mL | 0.625 mL | 1.25 mL | 1.5625 mL |
100 mM | 0.0313 mL | 0.1563 mL | 0.3125 mL | 0.625 mL | 0.7813 mL |
* Note: If you are in the process of experiment, it's necessary to make the dilution ratios of the samples. The dilution data above is only for reference. Normally, it's can get a better solubility within lower of Concentrations. |
Calcutta University
University of Minnesota
University of Maryland School of Medicine
University of Illinois at Chicago
The Ohio State University
University of Zurich
Harvard University
Colorado State University
Auburn University
Yale University
Worcester Polytechnic Institute
Washington State University
Stanford University
University of Leipzig
Universidade da Beira Interior
The Institute of Cancer Research
Heidelberg University
University of Amsterdam
University of Auckland
TsingHua University
The University of Michigan
Miami University
DRURY University
Jilin University
Fudan University
Wuhan University
Sun Yat-sen University
Universite de Paris
Deemed University
Auckland University
The University of Tokyo
Korea University
- Alizarin
Catalog No.:BCN3479
CAS No.:72-48-0
- H-Thr-OH
Catalog No.:BCC3102
CAS No.:72-19-5
- H-Val-OH
Catalog No.:BCC3138
CAS No.:72-18-4
- Sulfathiazole
Catalog No.:BCC4859
CAS No.:72-14-0
- H-Thr(tBu)-OMe.HCl
Catalog No.:BCC3107
CAS No.:71989-43-0
- Fmoc-Tyr(Bzl)-OH
Catalog No.:BCC3564
CAS No.:71989-40-7
- Fmoc-Tyr(tBu)-OH
Catalog No.:BCC3567
CAS No.:71989-38-3
- Fmoc-Thr(tBu)-OH
Catalog No.:BCC3552
CAS No.:71989-35-0
- Fmoc-Ser(tBu)-OH
Catalog No.:BCC3544
CAS No.:71989-33-8
- Fmoc-Pro-OH
Catalog No.:BCC3538
CAS No.:71989-31-6
- Fmoc-Met-OH
Catalog No.:BCC3528
CAS No.:71989-28-1
- Fmoc-Lys(Boc)-OH
Catalog No.:BCC3516
CAS No.:71989-26-9
- 2,2-Bis(4-chlorophenyl)-1,1-dichloroethylene
Catalog No.:BCC8493
CAS No.:72-55-9
- Metandienone
Catalog No.:BCC9025
CAS No.:72-63-9
- Chlorquinaldol
Catalog No.:BCC4648
CAS No.:72-80-0
- 2-Geranyl-4-isobutyrylphloroglucinol
Catalog No.:BCN7170
CAS No.:72008-03-8
- Henryoside
Catalog No.:BCN4276
CAS No.:72021-23-9
- NHS-LC-Biotin
Catalog No.:BCC3579
CAS No.:72040-63-2
- Lochnericine
Catalog No.:BCN4595
CAS No.:72058-36-7
- Sepinol
Catalog No.:BCN4277
CAS No.:72061-63-3
- Spinosin
Catalog No.:BCN1644
CAS No.:72063-39-9
- 6,2',4'-Trimethoxyflavone
Catalog No.:BCC3897
CAS No.:720675-74-1
- 5(6)-Carboxyfluorescein
Catalog No.:BCC8283
CAS No.:72088-94-9
- Mastoparan X
Catalog No.:BCC5833
CAS No.:72093-22-2
Removal of DDD and DDE from wastewater using bagasse fly ash, a sugar industry waste.[Pubmed:11257890]
Water Res. 2001 Jan;35(1):33-40.
Bagasse fly ash, a waste from the sugar industry, was converted into an effective adsorbent and was used for the removal of DDD [2,2-Bis(4-chlorophenyl)-1,1-dichloroethane] and DDE [2,2-Bis(4-chlorophenyl)-1,1-dichloroethene] pesticides from wastewater. The DDD and DDE are removed by the developed adsorbent up to 93% at pH 7.0, with the adsorbent dose of 5 g/l of particle size 200-250 microns at 30 degrees C. The removal of these two pesticides was achieved up to 97-98% in column experiments at a flow rate of 0.5 ml/min. The adsorption was found to be exothermic in nature. The bagasse fly ash system has been used for the removal of DDD and DDE from the wastewater. The developed system is very useful, economic, and reproducible.
Atmospheric contamination by pesticides: Determination in the liquid, gaseous and particulate phases.[Pubmed:19002404]
Environ Sci Pollut Res Int. 1997;4(3):172-80.
Between 1991 and 1993, 18 fogwater samples, 31 rainwater samples and 17 atmosphere (gas and particles) samples were analysed for 13 pesticides (pp'DDT,pp'DDD,pp'DDE, aldrin, dieldrin, lindane, hexachlorobenzene, fenpropathrin, mecoprop, methyl-parathion, atrazine, isoproturon and aldicarb). The samples were collected in a rural area where some of the compounds are in use (experimental INRA farm, "Institut National de la Recherche Agronomique" in Colmar, Eastern France, 80,000 inhabitants). This paper briefly presents the analytical methodology used and, in detail, the contamination level of the different atmospheric phases. The contamination levels are roughly constant throughout the year in all the atmospheric phases and the most abundant pesticides are those commonly used on the experimental INRA farm and other surrounding farms. Nevertheless, some pesticides not used since the 1970s such as 1,1-Bis(4-chlorophenyl)-2,2,2-trichloroethane (pp'DDT) and 2,2-Bis(4-chlorophenyl)-1,1-dichloroethane (pp 'DDD) are also detected in the atmosphere of Colmar. A small increase in the pesticide concentrations in the atmosphere (gas and particles) was observed during treatments.