Home >> Research Area >>Natural Products>>Iridoids>> 7-O-Methyl morroniside

7-O-Methyl morroniside

CAS# 41679-97-4

7-O-Methyl morroniside

Catalog No. BCN3882----Order now to get a substantial discount!

Product Name & Size Price Stock
7-O-Methyl morroniside: 5mg Please Inquire In Stock
7-O-Methyl morroniside: 10mg Please Inquire In Stock
7-O-Methyl morroniside: 20mg Please Inquire Please Inquire
7-O-Methyl morroniside: 50mg Please Inquire Please Inquire
7-O-Methyl morroniside: 100mg Please Inquire Please Inquire
7-O-Methyl morroniside: 200mg Please Inquire Please Inquire
7-O-Methyl morroniside: 500mg Please Inquire Please Inquire
7-O-Methyl morroniside: 1000mg Please Inquire Please Inquire
Related Products

Quality Control of 7-O-Methyl morroniside

Number of papers citing our products

Chemical structure

7-O-Methyl morroniside

3D structure

Chemical Properties of 7-O-Methyl morroniside

Cas No. 41679-97-4 SDF Download SDF
PubChem ID 127258930 Appearance Powder
Formula C18H28O11 M.Wt 420.4
Type of Compound Iridoids Storage Desiccate at -20°C
Solubility Soluble in Chloroform,Dichloromethane,Ethyl Acetate,DMSO,Acetone,etc.
Chemical Name methyl (1S,4aS,8S,8aS)-3-methoxy-1-methyl-8-[(2S,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-1,3,4,4a,8,8a-hexahydropyrano[3,4-c]pyran-5-carboxylate
SMILES CC1C2C(CC(O1)OC)C(=COC2OC3C(C(C(C(O3)CO)O)O)O)C(=O)OC
Standard InChIKey IZODPOCIKVLNIL-BSUNYROJSA-N
Standard InChI InChI=1S/C18H28O11/c1-7-12-8(4-11(24-2)27-7)9(16(23)25-3)6-26-17(12)29-18-15(22)14(21)13(20)10(5-19)28-18/h6-8,10-15,17-22H,4-5H2,1-3H3/t7-,8+,10+,11?,12+,13+,14-,15+,17-,18-/m0/s1
General tips For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.Stock solution can be stored below -20℃ for several months.
We recommend that you prepare and use the solution on the same day. However, if the test schedule requires, the stock solutions can be prepared in advance, and the stock solution must be sealed and stored below -20℃. In general, the stock solution can be kept for several months.
Before use, we recommend that you leave the vial at room temperature for at least an hour before opening it.
About Packaging 1. The packaging of the product may be reversed during transportation, cause the high purity compounds to adhere to the neck or cap of the vial.Take the vail out of its packaging and shake gently until the compounds fall to the bottom of the vial.
2. For liquid products, please centrifuge at 500xg to gather the liquid to the bottom of the vial.
3. Try to avoid loss or contamination during the experiment.
Shipping Condition Packaging according to customer requirements(5mg, 10mg, 20mg and more). Ship via FedEx, DHL, UPS, EMS or other couriers with RT, or blue ice upon request.

Source of 7-O-Methyl morroniside

The herbs of Lonicera morrowii

Biological Activity of 7-O-Methyl morroniside

Description7-O-Methyl morroniside is a natural product from Lonicera morrowii.

Protocol of 7-O-Methyl morroniside

Structure Identification
J Chromatogr A. 2017 Jun 30;1504:1-8.

Water-compatible micron-sized monodisperse molecularly imprinted beads for selective extraction of five iridoid glycosides from Cornus officinalis fructus.[Pubmed: 28511931 ]


METHODS AND RESULTS:
An efficient, accurate and sensitive method for the determination of five iridoid glycosides (IGs) in Cornus officinalis fructus using molecularly imprinted solid phase extraction (MISPE) coupled with high performance liquid chromatography (HPLC) has been developed. Water-compatible molecularly imprinted beads (MIBs) were synthesized by precipitation polymerization, using alkenyl glycosides glucose as the hydrophilic functional monomer. Scanning electron microscopy showed that the MIBs had a narrow particle size distribution, with diameters in the range 7.5-9.3μm. The special molecular recognition by the MIBs of IGs in aqueous media was verified by static adsorption, kinetic adsorption, and selectivity experiments. The newly prepared MIBs were used as sorbents in solid phase extraction (SPE) for the selective recognition of five IGs (loganin, morroniside, loganic acid, 7-O-ethyl-morroniside and 7-O-Methyl morroniside) in Cornus officinalis fructus. When optimized, the MISPE-HPLC method had good linearity (0.02-100mgg-1), with correlation coefficient (R)≥0.994. Recoveries at three spiked levels were in the range 80.0%-94.0%.
CONCLUSIONS:
Because of its excellent specificity and hydrophilicity, SPE based on monodisperse MIBs provides a promising pretreatment strategy for the analysis of active components in natural products, especially for the quality control of traditional Chinese medicines.

7-O-Methyl morroniside Dilution Calculator

Concentration (start)
x
Volume (start)
=
Concentration (final)
x
Volume (final)
 
 
 
C1
V1
C2
V2

calculate

7-O-Methyl morroniside Molarity Calculator

Mass
=
Concentration
x
Volume
x
MW*
 
 
 
g/mol

calculate

Preparing Stock Solutions of 7-O-Methyl morroniside

1 mg 5 mg 10 mg 20 mg 25 mg
1 mM 2.3787 mL 11.8934 mL 23.7869 mL 47.5737 mL 59.4672 mL
5 mM 0.4757 mL 2.3787 mL 4.7574 mL 9.5147 mL 11.8934 mL
10 mM 0.2379 mL 1.1893 mL 2.3787 mL 4.7574 mL 5.9467 mL
50 mM 0.0476 mL 0.2379 mL 0.4757 mL 0.9515 mL 1.1893 mL
100 mM 0.0238 mL 0.1189 mL 0.2379 mL 0.4757 mL 0.5947 mL
* Note: If you are in the process of experiment, it's necessary to make the dilution ratios of the samples. The dilution data above is only for reference. Normally, it's can get a better solubility within lower of Concentrations.

Organizitions Citing Our Products recently

 
 
 

Calcutta University

University of Minnesota

University of Maryland School of Medicine

University of Illinois at Chicago

The Ohio State University

University of Zurich

Harvard University

Colorado State University

Auburn University

Yale University

Worcester Polytechnic Institute

Washington State University

Stanford University

University of Leipzig

Universidade da Beira Interior

The Institute of Cancer Research

Heidelberg University

University of Amsterdam

University of Auckland
TsingHua University
TsingHua University
The University of Michigan
The University of Michigan
Miami University
Miami University
DRURY University
DRURY University
Jilin University
Jilin University
Fudan University
Fudan University
Wuhan University
Wuhan University
Sun Yat-sen University
Sun Yat-sen University
Universite de Paris
Universite de Paris
Deemed University
Deemed University
Auckland University
Auckland University
The University of Tokyo
The University of Tokyo
Korea University
Korea University
Featured Products
New Products
 

References on 7-O-Methyl morroniside

Water-compatible micron-sized monodisperse molecularly imprinted beads for selective extraction of five iridoid glycosides from Cornus officinalis fructus.[Pubmed:28511931]

J Chromatogr A. 2017 Jun 30;1504:1-8.

An efficient, accurate and sensitive method for the determination of five iridoid glycosides (IGs) in Cornus officinalis fructus using molecularly imprinted solid phase extraction (MISPE) coupled with high performance liquid chromatography (HPLC) has been developed. Water-compatible molecularly imprinted beads (MIBs) were synthesized by precipitation polymerization, using alkenyl glycosides glucose as the hydrophilic functional monomer. Scanning electron microscopy showed that the MIBs had a narrow particle size distribution, with diameters in the range 7.5-9.3mum. The special molecular recognition by the MIBs of IGs in aqueous media was verified by static adsorption, kinetic adsorption, and selectivity experiments. The newly prepared MIBs were used as sorbents in solid phase extraction (SPE) for the selective recognition of five IGs (loganin, morroniside, loganic acid, 7-O-ethyl-morroniside and 7-O-Methyl morroniside) in Cornus officinalis fructus. When optimized, the MISPE-HPLC method had good linearity (0.02-100mgg(-1)), with correlation coefficient (R)>/=0.994. Recoveries at three spiked levels were in the range 80.0%-94.0%. Because of its excellent specificity and hydrophilicity, SPE based on monodisperse MIBs provides a promising pretreatment strategy for the analysis of active components in natural products, especially for the quality control of traditional Chinese medicines.

Description

7-O-Methyl morroniside is an iridoid glycoside (IG) extracted from Cornus officinalis fructus, used in many traditional Chinese medicines.

Keywords:

7-O-Methyl morroniside,41679-97-4,Natural Products, buy 7-O-Methyl morroniside , 7-O-Methyl morroniside supplier , purchase 7-O-Methyl morroniside , 7-O-Methyl morroniside cost , 7-O-Methyl morroniside manufacturer , order 7-O-Methyl morroniside , high purity 7-O-Methyl morroniside

Online Inquiry for:

      Fill out the information below

      • Size:Qty: - +

      * Required Fields

                                      Result: